Mitsubishi Electric MELSEC iQ-R User Manual page 193

Write
The write target BACnet device set with the write function and the written property value are displayed.
For the settings for the write function, refer to the operating procedure from 1 to 5 described in the following section.
Page 132 How to use the write function
Operating procedure
1.
Select [BACnetRequest]  [Write] , and click the [Detail] button of the data bock to which the write function is executed.
2.
Check the execution result.
If an error occurred, check the row of "Status" and take corrective actions.
1 FUNCTIONS
1.12 Configuration Function
1
191