YASKAWA DX100 Instructions Manual page 39

DX100
4 Setup (Safety Range Function for Each Axis)
4.3 Setting Safety Range for Each Axis
3. Select a control group. The AXIS RANGE screen of the selected
control group will be displayed.
<Description of the screen>
STATUS: Indicates the status: SETTING or CONFIRMING or
MONITORING.
Status Contents
SETTING "SETTING" is displayed when setting the data.
CONFIRMING "CONFIRMING" is displayed when confirming the range
after data setting.
MONITORING "MONITORING" is displayed after confirming the data.
While "MONITORING" is displayed, the safety range
function for each axis is performed.
MAX/MIN: The maximum and minimum values of the safety range are
shown for each axis of the selected control group.
4. When MAX/MIN data are set, the following READBACK screen is
displayed.
– Check that MODIFY VALUE and READBACK VALUE are the same,
then press [YES]. The selected data will be changed. Press [NO] to
cancel editing.
4-6
HW0486052
HW0486052
39/56