Changing Security Mode - YASKAWA DX100 Instructions Manual

DX100
3 Setup (Safety Range Function for Robot)
3.1

Changing Security Mode

3. Change the mode from EDITING MODE to MANAGEMENT MODE.
Press [ENTER] in the SECURITY screen. Move the cursor to
"MANAGEMENT MODE" and then press [ENTER] again.
4. Input the password for MANAGEMENT MODE and press [ENTER].
The security mode is changed to MANAGEMENT MODE.
Security level
OPERATION
EDITING
NOTE
MANAGEMENT
3-2
Items that can be manipulated
Data such as the operating range cannot be
edited or viewed.
Data such as the operating range can be
edited or viewed. The "Safety Unit FLASH
Erase" can be performed in the
maintenance mode.
HW0486052
HW0486052
17/56