Power On Unit - YASKAWA DX100 Instructions Manual

DX100

2.1.4 Power On Unit

2 System Configuration
2.1 Outline
This power on unit is the unit to which an "auxiliary contact block" is added
in order to feed back the status of the built-in contactor to the functional
safety unit (JZNC-NSU01).
The standard power on unit should be replaced with this unit if needed.
Item
Unit type
Unit size
Function
Connector CN609
2-4
specification
□
JZRCR-YPU0 -2
Same size as the standard power on unit
(interchangeable)
Contactor auxiliary contact signal output is added.
(for the functional safety unit (JZNC-NSU01))
For the contactor auxiliary contact signal output
(added to the standard unit)
HW0486052
HW0486052
13/56