Canon CXDI-50C Service Manual page 80

Error Return Values and Log Output for print_stuff (Reference)
Error example
Success Return value: 0x00
There is no log output in this case.
Invalid parameter Return value: 0x00000001
CXDI description : DICOM connection error
The log output in this case is shown below.
-----------------------------------------------------------------------------------
**
**
**
------------------------------------------------------------------------------------
The server has not Return value: 0x00180012
started up. CXDI description : DICOM connection error
------------------------------------------------------------------------------------
The log output in this case is shown below.
18-135933[d2]ERR:
18-135933[d2]ERR:
18-135933[d2]ERR:
------------------------------------------------------------------------------------
After a command Return value: 0x10
request was sent to CXDI description: DICOM response error (CCRTRANS_ERR_RESP)
the server, an error The log output in this case is shown below.
was returned in ------------------------------------------------------------------------------------
response.
------------------------------------------------------------------------------------
After a command Return value: 0x18
request was sent to CXDI description :
the server, a
warning was The transfer process was successful, but a warning was returned from the server.
returned in The log output in this case is shown below.
response. ------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
The printer status Return value: 0x20
has returned an CXDI description :
error.
The log output in this case is shown below.
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
2. Installation Manual
Return value and log output
(CCRTRANS_ERR_DICOMPARAM)
-s Silent mode; do not print results of all print commands
-v Use verbose mode for DUL and SRV facilities
x Canon Hidden Special Mode
node The host name that is running a print server
port TCP/IP port number of print server
file One or more files that contain preformatted images for printing
(CCRTRANS_ERR_NOT_CONNECT)
d0012 Attempt to connect to unknown host: test
130012 Peer aborted Association
(or never connected)
180012 Failed to establish association
(Not determined)
DICOM response warning
(CCRTRANS_WRN_RESP)
(Not determined)
DICOM printer status error
(CCRTRANS_ERR_PRN_STATUS)
(Not determined)
- 63 -