Canon CXDI-50C Service Manual page 54

4) Change the window view size
4-1) After the CXDI application software start, press [Alt] + [Tab] key to show the "Debug
mode" prompt screen.
4-2) After the command prompt screen appears, click the icon (called System icon) where
is in right-top of its window.
4-3) System icon menu appears. Select Properties from the menu. [Fig 1]
4-4) Click the "Font" tab from the "ccrstart.bat" properties and change its size to "6 x 13".
4-5) Click the "Layout" tab and change the "Height" of the "Screen Buffer Size" to 5000.
Click [OK].
4-6) The "Apply Properties to Shortcut" appears and check the item of the "Modify
shortcut which started this window". Click [OK].
5) Delete CXDI application software from the "Startup Menu Group".
5-1) Connect the keyboard and the mouse to the control PC.
5-2) Turns the CXDI system power on, Windows XP start.
5-3) After the CXDI application software start, press [Alt] + [Tab] key to show the "Debug
mode" prompt screen.
5-4) Select "8 – Exit" to close the CXDI application software on the "Welcome to CCR".
5-5) After the CXDI application software closed and Window XP Desktop appear, open
the "Taskbar & Start Menu..." with "Start Menu" tab clicking.
Start>Settings>Taskbar and Start Menu
2. Installation Manual
Select the Properties item.
[Fig 1]
- 37 -