Canon CXDI-50C Service Manual page 61

3-7) Upon completion of the setting, restart the Windows XP.
3-8) Check the communication test in the sequence below to verify whether the CXDI is
now part of the network. To check the connections at the TCP/IP level, use the "ping"
command from the command prompt.
Start Programs
When the IP address of the connection destination is "173.17.7.123," for instance, the
following messages will be repeated.
If the CXDI has been connected properly:
Pic:>ping 172.17.7.123 (input on the DOS screen)
Pinging 17217.7.123 With 32 bytes of data:
Reply from 172.17.7.123:bytes=32 time <10ms TTL=255
Reply from 172.17.7.123:bytes=32 time <10ms TTL=255
Reply from 172.17.7.123:bytes=32 time <10ms TTL=255
Reply from 172.17.7.123:bytes=32 time <10ms TTL=2550
• If the CXDI has not been connected properly:
Pic:> ping 172.17.7.123 (input on the DOS screen)
Pinging 17217.7.123 With 32 bytes of data:
Request time out
Request time out
Request time out
Request time out
2. Installation Manual
Command Prompt
- 44 -