Removing The Pwb-40Xray - Canon CXDI-50C Service Manual

Removing the PWB-40XRAY

2.8
1. Remove the connector of each cable.
(1) Sensor cable (J002/CN2)
(2) X-ray I/F cable (J004)
(3) Remote switch cable (CN4)
(4) PWB-40XRAY board/50 Power supply (J001/CN3)
2. Loosen the screw fixes the PWB-40XRAY and remove it.
Note: The power supply cable must be removed before assembling.
4. Repair Guide
23