Display Brightness and Contrast Adjustment
Introduction
The following procedure should be performed whenever a front panel assembly or
processor assembly is replaced.
The brightness is controlled automatically after executing the
softkey. Press
The contrast adjustment is subjective and varies according to individual user
NOTE
requirements.
Procedure
1 Access the
2 When the desired display contrast level is obtained, press the
Keysight E4416A/E4417A Power Meters Service Guide
,
System
Display
softkey to increase the contrast, or the
of the display.
softkey, located under the
,
and
Service
More
softkey menu and use the
softkey menu.
Service
Adjustments
Set Brightness
Display
to locate this softkey menu.
softkey to decrease the contrast
3
Set Contrast
83