Design - Siemens ULTRAMAT 23 Manual

Description

3.2 Design

● Open interface architecture (ELAN (RS485), PROFIBUS-DP/PA), thus simplified process
integration
● Communication software. SIMATIC PDM and SIPROM GA.
● Remote operation and control (via SIPROM GA and PROFIBUS).
Special benefits when used in biogas plants
● Continuous measurement of all 4 important components, including H
● Long service life of the H
no diluting or backflushing necessary
3.2 Design
①
②
③
④
⑤
⑥
⑦
Figure 3-2
The ULTRAMAT 23 is also available as a bench-top unit. This version differs from the rack
unit shown here as follows:
● Closed housing without mounting frame.
● 2 handles on the sides.
● 4 rubber feet for setting up.
● The bench-top unit is not available with Ex approval.
22
S sensor even at increased concentrations;
2
Available as bench-top or rack unit.
80-digit display panel (4 lines with 20 characters each).
Dust-tight and washable membrane keyboard.
Flowmeter for monitoring the sample gas flow.
Gas and electrical connections at the rear.
O sensor (option) can be removed from the front after taking off the cover.
2
Control and function keys for operation.
Design of ULTRAMAT 23 as 19" rack unit
S
2
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003