Analyzers In Biogas Plants; Wetted Parts Unsuitable For The Process Medium - Siemens ULTRAMAT 23 Manual
Continuous gas analysis
gas analyzer for measuring ir-absorbing gases,
oxygen and hydrogen sulfide
Hide thumbs
Also See for ULTRAMAT 23:
- Operating instructions manual (168 pages) ,
- Product information (22 pages) ,
- Manual (140 pages)
Table of Contents
Advertisement
Connecting
5.1 Safety instructions
Note
In the case of device versions for use in Ex zone 2, it is also essential to observe the 'ATEX
compact operating instructions for rack units of Series 6' (A5E37888334)!
5.1.9
Analyzers in biogas plants
Explosion hazard
This device is used in biogas plants, among other places. When it is used in biogas plants,
you should expect that the sample gas will contain methane, which forms explosive
mixtures with oxygen or air in certain concentrations. These conditions are possible with
certain operating states of the plant.
5.1.10
Wetted parts unsuitable for the process medium
Wetted parts unsuitable for the process media
Danger of injury or damage to device.
Hot, toxic and corrosive media could be released if the process medium is unsuitable for
the wetted parts.
• Ensure that the material of the device parts wetted by the process medium is suitable for
70
DANGER
WARNING
the medium. Refer to the information in Technical specifications (Page 31).
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
Advertisement
Table of Contents
