Functions
8.3 Parameter
Figure 8-1
8.3.5
Parameter: Pump/LCD contrast
8.3.5.1
Parameters: Pump/LCD contrast: Pump
130
Time constants
The following values are possible for the time constants:
• T
90
• T
90
• Threshold (data in %): 0 ... 100% of smallest range
You can use this menu to select two dialogs via which the
pump capacity and the contrast of the LCD can be changed.
In this menu you can:
• Increase the pump capacity using the <→> or <↑> key
• Decrease the pump capacity using the <↓> key
• Store the set pump capacity using the <ENTER> key
• Cancel the input using the <ESC> key.
Changes to the pump capacity are shown on the flowmeter
and directly in the menu display by the message "o.k." or "not
o.k.".
within: 0.1 to 99.9 (s)
outside: 0.1 to 99.9 (s)
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003