Safety Instructions - Siemens ULTRAMAT 23 Manual

Safety instructions

Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. The products and solutions
from Siemens undergo continuous development with this factor in mind. Siemens strongly
recommends that you regularly check for product updates.
For the safe operation of products and solutions from Siemens, it is necessary to take
suitable protective measures (e.g. cell protection concept) and to integrate each component
into an overall IT security concept which corresponds to state-of-the-art IT technology. Third-
party products that may be in use should also be considered. For more information about
industrial security, visit http://www.siemens.com/industrialsecurity
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. For further information, see
http://support.automation.siemens.com (http://support.automation.siemens.com).
Improper use
A device in the standard version must never be used in hazardous areas.
Explosive gas mixtures (e.g. flammable gases together with air or oxygen in a potentially
explosive ratio) must not be measured with this analyzer.
Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
WARNING
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
2
15