Upgrading Options - Siemens ULTRAMAT 23 Manual

Description
3.7 Communication
● Online help
● Cyclic storage of measured values
● Status on hard disk and export to commercially available user programs
● Download of new software
● Drift values according to QAL 3, DIN EN 14181
Hardware requirements:
● PC/laptop Pentium 133 MHz, RAM 32 MB, CD-ROM drive
● At least 35 MB free disk space
● VGA graphics card supported by Windows
● Printer supported by Windows
● Vacant COM port for direct coupling to ELAN RS485 network
● For connection of the Ethernet/485 interface converter, a standard network of 10 Mbit or
100 Mbit (RJ 45 connection) with TCP/IP is necessary.
● In the case of an RS485 network, the distance should not exceed 500 m. If this distance
is exceeded, a repeater must be used.
Software requirements:
● Windows 98
● Windows 2000
● Windows XP
● Windows Vista
● Windows 7
The SIPROM GA software is available on the Internet and can downloaded from the
following address: SIPROM GA download
(http://support.automation.siemens.com/WW/llisapi.dll?aktprim=0&lang=en&referer=%2fWW
%2f&func=cslib.csinfo&siteid=csius&groupid=4000002&extranet=standard&viewreg=WW&n
odeid0=10806991&objaction=csopen)
3.7.4.2

Upgrading options

It is possible to upgrade the device firmware of older gas analyzers using the SIPROM GA
software. Details can be found in the following table.
Firmware upgrades for older analyzers
ULTRAMAT 23 (prior to SW version 2.06) (all languages)
62
Article No.
C79451-A3494-S501
Manual, 3/2016, A5E37100388-003
ULTRAMAT 23