8.4.4
Configuration: Factory configuration
Overview
8.5
Automatically executed functions
8.5.1
Probe protection and purging function
A protection and purging function is implemented by means of software since H
concentrations above the specified continuous concentration impair the functionality and
service life of the H
In addition, a purging function is implemented for the 50 ppm H
intermittent measurement above the permissible continuous concentration.
These functions are executed automatically when certain operating states occur.
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
These are factory settings made especially for your analyzer.
Since incorrect modifications to these parameters may perma-
nently influence the functions of your analyzer, access to these
functions is only possible by specially trained and authorized
servicing engineers using a special access code.
S probes.
2
8.5 Automatically executed functions
S probe in order to allow an
2
Functions
S
2
155