Connecting
5.1
Safety instructions
5.1.1
Condensation in the device
NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature difference between
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation let the device adapt for several hours in the new
5.1.2
Laws and directives
Observe the test certification, provisions and laws applicable in your country during
connection, assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EC)
5.1.3
Operation in hazardous areas
Operation of analyzers in hazardous areas
For safe operation of the analyzer in hazardous areas, it is essential to observe the
information and conditions referred to in "Information pursuant to ATEX for use in
hazardous areas" (Order No.: A5E37888334)
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
environment.
WARNING
5
67