Positioning Aids - Otto Bock Kimba neo Instructions For Use Manual

Usage
Using the belt
1) Press the red button to unfasten the belt (see Fig. 45, item 1).
2) Move the shoulder/lap belt straps to the side.
3) Sit the user into the seat.
4) Place the belt over his/her shoulders.
5) Make sure the two belt tabs click into the buckle (see Fig. 50).

6.8.7 Positioning aids

WARNING
Incorrect application of the belt system/positioning aid
Strangulation, suffocation
► Follow the instructions for proper application so that the user cannot slip into a position that would endanger
him or her.
► Note that the user's back must be up against the back upholstery when securing the belt system/positioning
aid and during use of the product.
► Do not use safety belts or positioning aids if the user is able to sit without them.
WARNING
Use of the belt system as a restraint system in a wheelchair accessible vehicle is forbidden
The user may fall out of the product or sustain severe injuries if there is an accident
► Under no circumstances may the safety belts and positioning aids offered with the product be used as part of
a restraint system for transportation in a wheelchair accessible vehicle.
► Note that the safety belts and positioning aids offered with the product are only intended to help support the
user sitting in the product.
The rehab buggy can be equipped with positioning systems.
The option has been installed and preset by qualified personnel. If the option is too tight or cannot be locked, the
positioning system can be adjusted subsequently if necessary.
28 | Ottobock
47
49
48
50
Kimba neo