Communications Menu - Stanley QB Expert Instruction Manual

SETUP Area
3.1.2.6 Exit
Programming changes are stored after exiting current menu. Alert Operator(s) to any changes in tool behavior
before saving.
Press the YES interactive menu button to save the changes and exit the programming mode.
Press NO to discard the current changes and exit the programming mode.
Press CANCEL to not exit the programming mode and continue modifying parameters.

3.1.3 COMMUNICATIONS Menu

This area changes the setting of the Ethernet, Serial and fieldbus Communications port(s) located on the bottom
of the Alpha. Users must have COMMUNICATIONS, SETUP or ADMINISTRATOR access level to modify values in
this area.
Select Communications by pressing the SETUP interactive menu button on the Run screen.
Press 2 or highlight selection and press Toggle button.
3.1.3.1 TCP/IP Tab
52
QB Expert Alpha Controller