Ce Directives (Europe); Machinery Directive Compliance - Stanley QB Expert Instruction Manual

Controller Functions and Connections
1.2 Controller Functions and Connections
This table refers to the picture on the previous page.
Item Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Information about these items is discussed elsewhere in this manual. Use the Table of Contents to find the page
for the item of interest. If this is an electronic document you are reading click on the item in the Table of Contents
and it will link you directly to the page. Or press CNTRL+F on the keyboard to search the document for the item
of interest.
1.3

CE Directives (Europe)

STANLEY Engineered Fastening Assembly Technologies declares that the QPM QB Expert Alpha controller
conforms to all the applicable regulations of the Machinery Directive. See the CE Declaration of Conformity that
is delivered with each QB Expert Alpha controller.

1.3.1 Machinery Directive Compliance

This product complies with the requirements of the European Machinery Directive (2006/42/EC). See the CE
Declaration of Conformity that is delivered with the product.
4
Functional Description
Red, Green, Yellow LEDs for Limits Evaluation
Programmable and Tool Ready LEDs
Display
Function Keys with Active Label Above
Maintenance Due Indicator
Cursor Keys with Center Button to Expand Lists
Numeric Keypad to Enter Numbers or Select Options
Power Switch
Alpha Toolbox Connector
USB Port for Data Transfer
Tool Connector
Plant/ Spindle Network Ethernet Connectors
Optional Master DeviceNet Connector
Serial Connector
Optional Profibus or DeviceNet Connector
Power Input
19-Pin, 24V DC Input/Output Connector
Optional Fieldbus Ethernet Connectors
Indicates WiFi Enabled (when present)
QB Expert Alpha Controller