Menus - Stanley QB Expert Instruction Manual

The controller display windows are dynamic, rather than static, and indicate the status of the fastening cycle. They
will turn green for an OK fastening cycle and red for a NOK fastening cycle for one second then return to normal.
A red box will cover the display if there is a fault until the fault is cleared.
A yellow box will cover the display if there is a message until the condition is cleared.
The active spindle number is displayed in the upper right hand corner and the controller display window for the
active spindle will be a darker color than the others.
To switch between spindles click on the controller display window for the desired spindle. Once a spindle is
selected it becomes the active spindle and all menu items on the left belong to the active spindle.

4.2.1 Menus

Click on a menu item to view or edit that area of the controller. The menu item's window appears with its own
controls.
The black bar at the top of the Alpha Toolbox screen provides a navigation button as well as area appropriate
buttons. Underneath the black bar on the left are the controls for the area. The Add, Delete, Copy, Paste buttons
are the same as the MANAGE interactive menu button on the controller for each particular area. The windows
below that are the tabs that correspond to each area. The area on the right displays the parameters for each area.
See section "3 Programming" on page 26 for descriptions on these menu items and parameters and how to
Instruction Manual
89