Trace Tab - Stanley QB Expert Instruction Manual

Tool Output Angle – Identifies the number of circular degrees of rotation on the tool output. Resets at each start.
Tool Output Speed – Identifies the real time speed of the tool output.
The IDENTIFY interactive menu button will flash the red, yellow and green status lights on the selected tool and
controller to distinguish it from another.
The Identify Spindle dialog box will appear when identifying is active. Press the OK interactive menu button to
clear and stop the flashing lights.
Use the right arrow to move to the next tab or press EXIT to save the changes and return to the Run screen. See
section "3.1.2.6 Exit" on page 52.

3.3.2 TRACE Tab

Press the right arrow to enter the Trace area of the controller.
This tab plots a torque verses time curve after every fastening cycle. The Y-axis is auto-scaled from 0 to maximum
torque of the data. The X-axis has a variable scale to include the entire fastening cycle.
Use the TORQUE interactive menu button to choose how to view the trace.
Instruction Manual
Programming
81