Jobs: Manual Programming - Stanley QB Expert Instruction Manual

The Job tab screen appears. This allows manual editing of parameters prior to saving Wizard programming. To
save, press the EXIT interactive menu button.
Press the YES interactive menu button to save changes. This saves the parameters and opens the Run screen.

3.1.2 JOBS: Manual Programming

Jobs, Tasks and Steps are required to setup a tool strategy. Inputs and Triggers are used to select specific Jobs or
Tasks with different tool strategies, including Error Proofing (bolt counting). Program Job parameters according to
the plant integration scheme desired and then program Task(s) and Step(s) to create the tool strategy.
Job settings apply to all Tasks and Steps within the Job. There can be up to 255 Jobs per Alpha controller.
Select Jobs by pressing the SETUP interactive menu button on the Run screen.
Press 1 or highlight Jobs selection and press the Toggle button.
There can be more than one Job.
Name
Instruction Manual
Use the left/right arrow keys to select the tab/Job for modifying.
Name the Job to define the operation performed (15 character maximum). Use the up/
down arrows to spell with letters or use the numeric keypad. When using the PFCS
protocol a Machine ID value must be entered here. This name will appear on the Run
screen when the Job is selected.
Programming
37