Setting The Number Of Average Measurements - Dräger JM-103 Instructions Manual

Setting the Number of Average Measurements

1. Set the Power switch to On or press
the Reset button to prepare the
instrument for measurement.
• n-1, n-2, and so on (up to n-5)
will appear.
2. Press the Reset button for 5 seconds. The number of average
measurements will switch as follows:
3. Release the Reset button when the required number of average
measurements is displayed.
• If n-2 through n-5 is selected,
AVG appears in the upper left
corner of the display.
• The selected number of average
measurements will be recorded.
Jaundice Meter Instructions for Use (MU01380)
DRAFT 20 June 2005
Page 5 - 5