Dräger JM-103 Instructions Manual page 26

Guidance and Manufacturer's Declaration—Electromagnetic
The Jaundice Meter is intended for use in the electromagnetic environ-
ments specified below. The customer or user of the unit should ensure
that the unit is used in such environments.
Immunity
Test
NOTE:
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE:
These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from
structures, objects, and people.
a. Field strengths from fixed transmitters, such as base stations for radio,
cellular/cordless telephones, land-mobile radios, amateur radio, AM and FM
radio broadcast, and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed-RF
transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the unit is used exceeds the
applicable RF compliance level, observe the unit to verify normal operation.
If abnormal performance is observed, additional measures may be necessary,
such as reorienting or relocating the unit.
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be < 3
V/m.
Page 2 - 16
DRAFT 20 June 2005
IEC
Compli
60601
ance
Test
Level
Level
Immunity
Electromagnetic Environment—
Recommended Separation Distance
Jaundice Meter Instructions for Use (MU01380)
Guidance