Dräger JM-103 Instructions Manual page 45

4. While ensuring that the Ready lamp is illuminated, repeat the
measuring until the number of remaining measurements is 0.
• When the remaining number of
measurements is completed, the
average of the measured values
appears in the display.
• If the instrument is left without
the preset number of
measurements taken, the setting
will be canceled without the
measurement value being
displayed. To set the average
measurements again, press the Reset button and reset the
number of average measurements needed.
• To change the number of average measurements, refer to
"Setting the Number of Average Measurements" on page 5-5.
Jaundice Meter Instructions for Use (MU01380)
DRAFT 20 June 2005
Page 5 - 7