Answering A Call; Call Mute And Un-Mute - Yealink T53 Manual

Placing a Call
Using the handset:
1.
Pick up the handset.
2. Enter the number, and then press the
Using the speakerphone:
1.
With the handset on-hook, press
2.
Enter the number, and then press the
Using the headset:
1.
With the headset connected, press
2.
Enter the number, and then press the
During a call, you can alternate between the headset, hands-free speakerphone and handset
modes by pressing the key
connected headset.

Answering a Call

Using the handset: pick up the handset.
Using the speakerphone: press
Using the headset: press
You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset: hang up the handset or press the End Call soft key.
Using the speakerphone: press
Using the headset: press the End Call soft key.
Redial
to enter the Placed Calls list, press
• Press
or the Send soft key.
then press
• Press twice when the phone is idle to dial out the last dialed number.

Call Mute and Un-mute

• Press to mute the microphone during a call.
• Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
or the Hold soft key during an active call.
Press
To resume the call, do one of the following:
• If there is only one call on hold, press
• If there is more than one call on hold, press
or the Resume soft key.
Send
soft key.
.
Send
soft key.
to activate the headset mode.
Send
soft key.
, the key or by picking up the handset. Headset mode requires a
.
.
or the End Call soft key.
or the Resume soft key.
or
or to select the desired entry, and
to select the desired call, and then press
3