Apply A Phone Password - Cisco 8811 Administration Manual

Set Up Phone from Setup Menus
• Use the navigation arrows to select the desired menu and then press Select.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 6 To display a submenu, repeat step 5.
Step 7
To exit a menu, press Exit or the back arrow .

Apply a Phone Password

You can apply a password to the phone. If you do, no changes can be made to the administrative options on
the phone without password entry on the Admin Settings phone screen.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile
Configuration window (Device > Device Settings > Common Phone Profile).
Step 2 Enter a password in the Local Phone Unlock Password option.
Step 3 Apply the password to the common phone profile that the phone uses.
Text and Menu Entry from Phone
When you edit the value of an option setting, follow these guidelines:
• Use the arrows on the navigation pad to highlight the field that you wish to edit, then press Select in the
navigation pad to activate the field. After the field is activated, you can enter values.
• Use the keys on the keypad to enter numbers and letters.
• To enter letters by using the keypad, use a corresponding number key. Press the key one or more times
to display a particular letter. For example, press the 2 key once for "a," twice quickly for "b," and three
times quickly for "c." After you pause, the cursor automatically advances to allow you to enter the next
letter.
• Press the arrow softkey
cursor.
• Press Cancel before pressing Save to discard any changes that you made.
• To enter an IP address, you enter values into four segments already divided for you. When you have
finished entering the leftmost digits before the first period, use the right arrow key to move to the next
segment. The period that follows the leftmost digits is automatically inserted.
• To enter a colon for an IPv6 address, press * on the keypad.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
42
if you make a mistake. This softkey deletes the character to the left of the