Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

Feature
Programmable Feature Buttons
Quality Reporting Tool (QRT)
Recents
Redial
Remote Port Configuration
Reroute Direct Calls to Remote
Destination to Enterprise Number
Remove 'Call Ended' Prompt Timer
Ringtone Setting
RTCP Hold For SIP
Description and more information
You can assign features, such as New Call, Call Back, and Forward All to line buttons.
See phone button template information in the documentation for your particular Cisco
Unified Communications Manager release.
Allows users to submit information about problem phone calls by pressing a button.
QRT can be configured for either of two user modes, depending upon the amount of user
interaction desired with QRT.
Allows users to see the 150 most recent individual calls and call groups. You can see
the recently dialed numbers, missed calls, and delete a call record.
Allows users to call the most recently dialed phone number by pressing a button or the
Redial softkey.
Allows you to configure the speed and duplex function of the phone Ethernet ports
remotely by using Cisco Unified Communications Manager Administration. This enhances
the performance for large deployments with specific port settings.
If the ports are configured for Remote Port Configuration in Cisco Unified
Note
Communications Manager, the data cannot be changed on the phone.
See Remote Port Configuration,
Reroutes a direct call to a user's mobile phone to the enterprise number (desk phone).
For an incoming call to remote destination (mobile phone), only remote destination rings;
desk phone does not ring. When the call is answered on their mobile phone, the desk
phone displays a Remote In Use message. During these calls, users can make use of
various features of their mobile phone.
See the Cisco Unified Mobility information in the documentation for your particular
Cisco Unified Communications Manager release.
Improves the End Call response time by removing the Call ended message display
on the phone screen.
Identifies ring type used for a line when a phone has another active call.
See directory number information in the documentation for your particular Cisco Unified
Communications Manager release and
Ensures that held calls are not dropped by the gateway. The gateway checks the status
of the RTCP port to determine if a call is active or not. By keeping the phone port open,
the gateway will not end held calls.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Product Specific Configuration, on page
Custom Phone Rings, on page
Telephone Features
138.
113.
131