Set Park Monitoring Parameters For Directory Numbers - Cisco 8811 Administration Manual

Set Park Monitoring Parameters for Directory Numbers

The Directory Number Configuration window contains a Park Monitoring area where you can configure the
three parameters.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Call Routing > Directory Number.
Step 2 Set the park monitoring fields as described in the following table.
Table 28: Park Monitoring Parameters
Field
Park Monitoring Forward
No Retrieve Destination
External
Park Monitoring Forward
No Retrieve Destination
Internal
Park Monitoring Reversion
Timer
Set Up Park Monitoring for Hunt Lists
When a call that was routed via the hunt list is parked, the Hunt Pilot Park Monitoring Forward No Retrieve
Destination parameter value is used (unless it is blank) when the Park Monitoring Forward No Retrieve Timer
expires.
Description
When the parkee is an external party, the call forwards to the specified
destination in the parker Park Monitoring Forward No Retrieve Destination
External parameter. If the Forward No Retrieve Destination External field
value is empty, the parkee is redirected to the parker line.
When the parkee is an internal party, the call forwards to the specified
destination in the parker's Park Monitoring Forward No Retrieve Destination
Internal parameter. If the Forward No Retrieve Destination Internal is empty,
the parkee is redirected to the parker line.
This parameter determines the number of seconds that Cisco Unified
Communications Manager waits before prompting the user to retrieve a call
that the user parked. This timer starts when the user presses Park on the phone,
and a reminder is issued when the timer expires.
Default: 60 seconds
If you configure a nonzero value, this value overrides the value of this parameter
set in the Service Parameters window. However, if you configure a value of
0 here, then the value in the Service Parameters window is used.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Phone Feature Configuration
175