X Authentication Options - Cisco 8811 Administration Manual

Supported Security Features
Procedure
Step 1
Press Applications
Step 2 Choose Admin settings > Security setup > 802.1X Authentication.
Step 3
Configure the Options as described in
Step 4 To exit this menu, press Exit.

802.1X Authentication Options

The following table describes the 802.1X authentication options.
Table 21: 802.1X Authentication Settings
Option
Device
Authentication
Transaction Status
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
110
.
802.1X Authentication Options, on page
Description
Determines whether 802.1X authentication is
enabled:
• Enabled: Phone uses 802.1X authentication
to request network access.
• Disabled: Default setting. The phone uses
CDP to acquire VLAN and network access.
State: Displays the state of 802.1x authentication:
• Disconnected: Indicates that 802.1x
authentication is not configured on the
phone.
• Authenticated: Indicates that the phone is
authenticated.
• Held: Indicates that the authentication
process is in progress.
Protocol: Displays the EAP method that is used
for 802.1x authentication (can be EAP-FAST or
EAP-TLS).
110.
To change
See Set Device Authentication Field,
on page 111.
Display only. Cannot configure.