Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

Field
Phone On Time
Phone Off Time
Phone Off Idle Timeout
Description
Determines when the phone automatically turns on for the days that are in the Enable Power Save
Plus field.
Enter the time in this field in 24-hour format, where 00:00 is midnight.
For example, to automatically power up the phone at 07:00 a.m. (0700), enter 07:00. To power
up the phone at 02:00 p.m. (1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later than the Phone Off Time. For
Note
example, if the Phone Off Time is 07:00, the Phone On Time must be no earlier than
07:20.
The time of day that the phone powers down for the days that are selected in the Enable Power
Save Plus field. If the Phone On Time and the Phone Off Time fields contain the same value, the
phone does not power down.
Enter the time in this field in 24-hour format, where 00:00 is midnight.
For example, to automatically power down the phone at 7:00 a.m. (0700), enter 7:00. To power
down the phone at 2:00 p.m. (1400), enter 14:00.
The default value is blank, which means 00:00.
The Phone On Time must be at least 20 minutes later than the Phone Off Time. For
Note
example, if the Phone Off Time is 7:00, the Phone On Time must be no earlier than 7:20.
The length of time that the phone must be idle before the phone powers down.
The timeout occurs under the following conditions:
• When the phone was in Power Save Plus mode, as scheduled, and was taken out of Power
Save Plus mode because the phone user pressed the Select key.
• When the phone is repowered by the attached switch.
• When the Phone Off Time is reached but the phone is in use.
The range of the field is 20 to 1440 minutes.
The default value is 60 minutes.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Phone Feature Configuration
159