Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

Feature
Device Invoked Recording
Directed Call Park
Display Battery Strength and Signal
Strength Icons
Distinctive Ring
Do Not Disturb (DND)
Enable/Disable JAL/TAL
EnergyWise
Enhanced Line Mode
Description and more information
Provides end users with the ability to record their telephone calls via a softkey.
In addition administrators may continue to record telephone calls via the CTI User
Interface.
See monitoring and recording information in the documentation for your particular Cisco
Unified Communications Manager release.
Allows a user to transfer an active call to an available directed call park number that the
user dials or speed dials. A Call Park BLF button indicates whether a directed call park
number is occupied and provides speed-dial access to the directed call park number.
If you implement Directed Call Park, avoid configuring the Park softkey. This
Note
prevents users from confusing the two Call Park features.
See call park information in the documentation for your particular Cisco Unified
Communications Manager release.
Displays the battery and signal strength of the mobile phone on the IP Phone when the
mobile phone is connected to the IP Phone using Bluetooth.
Cisco IP Phone 8851NR does not support Bluetooth.
Users can customize how their phone indicates an incoming call and a new voice mail
message.
See call pickup information in the documentation for your particular Cisco Unified
Communications Manager release.
When DND is turned on, either no audible rings occur during the ringing-in state of a
call, or no audible or visual notifications of any type occur.
When enabled, the phone header turns red and Do not disturb is displayed on the phone.
If multilevel precedence and preemption (MLPP) is configured and the user receives a
precedence call, the phone will ring with a special ringtone.
See Set Up Do Not Disturb, on page
Allows the administrator to control the Join Across Lines (JAL) and Direct Transfer
Across Lines (TAL) features.
See Join and Direct Transfer Policy,
Enables an IP Phone to sleep (power down) and wake (power up) at predetermined times,
to promote energy savings.
See Schedule EnergyWise on Cisco IP Phone, on page
Enable Enhanced Line Mode to use the buttons on both sides of the phone screen as line
keys.
See Set Up Additional Line Keys, on page 189

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

161.
Product Specific Configuration, on page
157.
Telephone Features
138.
125