Video Transmit Resolution Setup - Cisco 8811 Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Phone > Device.
Step 2 Locate the phone you want to modify.
Step 3 Locate the Bluetooth field and set the field to Enabled.
Step 4
Locate the Allow Bluetooth Mobile Handsfree Mode field, and set the field to Enabled.
Step 5 Save the changes and apply them to the phone.

Video Transmit Resolution Setup

Cisco IP Phone 8845, 8865, and 8865NR supports the following video formats:
• 720p (1280x720)
• WVGA(800x480)
• 360p (640x360)
• 240p (432x240)
• VGA (640x480)
• CIF (352x288)
• SIF (352x240)
• QCIF (176x144)
Cisco IP Phones with video capacity negotiate best resolution for bandwidth based on phone configures or
resolution limitations. Example: On a direct 88x5 to 88x5 call, the phones do not send true 720p, they send
800x480. This limitation is purely due to the 5-inch WVGA screen resolution on the 88x5 being 800 x 480.
Video type
720p
720p
WVGA
WVGA
360p
360p
240p
240p
Video resolution
1280 x 720
1280 x 720
800 x 480
800 x 480
640 x 360
640 x 360
432 x 240
432 x 240
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Video Transmit Resolution Setup
Frames per second (fps) Video bit rate range
30 1360–2500 kbps
15
790–1359 kbps
30
660–789 kbps
15
350–399 kbps
30 400–659 kbps
15 210–349kbps
30
180–209kbps
15
64–179kbps
193