Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

Phone Feature Configuration
Field Name Field Type
or Choices
User Credentials Disabled
Persistent for
Enabled
Expressway Sign in
Customer support String, up to 256
upload URL characters
Web Admin Disabled
Enabled
Admin Password
String of 8–127
characters
WLAN SCEP Server String of up to 256
characters

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

152
Default Description and Usage Guidelines
Disabled Controls if the phone stores the users' sign-in credentials. When
disabled, the user is always sees the prompt to sign into the
Expressway server for Mobile and Remote Access (MRA).
If you would like to make it easier for users to log in, you
enable this field so that the Expressway login credentials are
persistent. The user then only has to enter their login credentials
the first time. Any time after that (when the phone is powered
on off-premise), the login information is prepopulated on the
Sign-in screen.
For more information, see the
Through Expressway, on page
Provides the URL for the Problem Report Tool (PRT).
If you deploy devices with Mobile and Remote Access through
Expressway, you must also add the PRT server address to the
HTTP Server Allow list on the Expressway server.
For more information, see the
Through Expressway, on page
Disabled Enables or disables administrator access to the phone web
pages through a web browser
For more information, see the
Page for Phone, on page
Defines the administrator password when you access the phone
web pages as an administrator.
Specifies the SCEP Server that the phone uses to obtain
certificates for WLAN authentication. Enter the hostname or
the IP address (using standard IP addressing format) of the
server.
Mobile and Remote Access
166.
Mobile and Remote Access
166.
Configure the Administration
105.