Set Up Idle Display - Cisco 8811 Administration Manual

b) Set the Advertise G.722 and iSAC Codec parameter in the Product Specific Configuration area.
The default value of this product-specific parameter is to use the value that the enterprise parameter
specifies. If you want to override this on a per-phone basis, choose Enabled or Disabled

Set Up Idle Display

You can specify an idle display (text only; text file size should not exceed 1M bytes) that appears on the phone
screen. The idle display is an XML service that the phone invokes when the phone is idle (not in use) for a
designated period and no feature menu is open.
For detailed instructions about creating and displaying the idle display, see Creating Idle URL Graphics on
Cisco IP Phone at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml
In addition, see the documentation for your particular Cisco Unified Communications Manager release for
the following information:
• Specifying the URL of the idle display XML service:
• Specifying the length of time that the phone is not used before the idle display XML service is invoked:
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone
Step 2 In the Idle field, enter the URL to the idle display XML Service.
Step 3 In the Idle Timer field, enter the time that the idle phone waits before displaying the idle display XML service.
Step 4
Select Save.
Customize the Dial Tone
You can set up your phones so that users hear different dial tones for internal and external calls. Depending
upon your needs, you can choose from three dial tone options:
◦ For a single phone: Idle field in the Phone Configuration window in Cisco Unified Communications
Manager Administration.
◦ For multiple phones simultaneously: URL Idle field in the Enterprise Parameters Configuration
window, or the Idle field in the Bulk Administration Tool (BAT)
◦ For a single phone: Idle Timer field in the Phone configuration window in Cisco Unified
Communications Manager Administration.
◦ For multiple phones simultaneously: URL Idle Time field in the Enterprise Parameters Configuration
window, or the Idle Timer field in the Bulk Administration Tool (BAT)
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Set Up Idle Display
115