Drc Program 1; Drc Program 2 And Drc Program 3; Video Delay; Audio Delay - Linear Acoustic AERO.10 User Manual

5.3.2. DRC Program 1
To quickly set the DRC for Program 1 (Main Program), navigate to:
Instance 1 > DRC - Program 1 > Load Preset
Select and load a loudness control preset.
Instance 1 > DRC - Program 1 > Final
Adjust Output Level so that the average loudness value on the Program 1 loudness
meter is on target. (Typically -24 dB LKFS or -23 dB LUFS)
5.3.3. DRC Program 2 and DRC Program 3
These are set similarly to DRC Program 1, listed above.
5.3.4. Video Delay
Video delay of up to one full second (1000 ms) is included in order to maintain A/V
Sync through the SDI I/O. To adjust the video compensating delay, navigate to:
System > I/O Setup > SDI Video Delay
Simply grab the slider bar and move it to the desired delay setting.
5.3.5. Audio Delay
Similarly, Audio delay of up to 680 ms of audio delay is available at *each* audio
output pair in order to maintain A/V Sync, or audio to audio sync through the
AERO.10. To adjust the audio compensating delay, navigate to:
Instance 1 > Output > Output Delay
Simply grab the slider bar and move it to the desired delay setting.
58