Table of Contents
Advertisement
Password
Press the encoder to the right. A keyboard screen will appear.
•
Note!
A password is required to unlock the unit's front panel control.
The default factory password is "1234"
• Turn the knob left one click to the "123" selection
• Click right (you will see the keyboard change to numbers and symbols)
• Turn the knob left until you get to "1", then click right to accept it
• Continue setting the password to "1234"
• Scroll to "Ok" and click right to accept
You should now be back at the main screen
• Click down once to highlight the "Unlock" screen (
• Click right (the menu will change and "Lock Panel" will appear)
field
Figure 5: Locked Front Panel Screen
Figure 6: Keyboard Screen
Figure 7: Front Panel Screen after unlocking
22
)
Advertisement
Table of Contents
