Sdi Output Routing; Setting The Output Level To The Target Level - Linear Acoustic AERO.10 User Manual

2.2.7.3.
The AERO.10 includes the ability to pass through audio pairs from the SDI input, or
to embed audio that has been processed by the AERO.10 or from any source.
To enable or disable embedding, and configure the SDI output stream, navigate to:
" " "
System > I/O Setup
2.2.8. Setting the Output Level to the Target Level
The factory default processing preset is TV 5B GEN and is suitable for a wide range
of program material. It is designed to deliver an average output of -24dB LKFS. If
Figure 12: Output Routing Menu (SDI)
SDI Output Routing:
" > " "
SDI Embedding
Figure 13: SDI Embedding Menu
27