On the front panel of the AERO.10, you will find:
• Power Indicator
• LCD display
• Rotary joystick encoder
• Headphone volume control
• Headphone jack
• USB connector
The LCD display provides the user with visual feedback and interaction as to what
the AERO.10 is doing, parameter settings, and input signal status.
It is possible to configure the unit with the front panel controls and display, but
doing so by way of the remote client, NfRemote, is much easier and offers a number
of benefits.
Operation of the AERO.10 via the front panel, and via NfRemote is described later in
this manual.
1.4.2. Rear panel
The rear panel of the AERO.10 is where most connections are made.
1.5. Connections
This section covers the connections found on the AERO.10. Except where noted, all
connections are on the rear panel of the unit.
1.5.1. Front Panel Headphone Connection
A ¼" headphone output, with user selectable patch point is included on the front
panel of the AERO.10. A dedicated volume control for the headphone output is
included on the front panel directly next to the headphone output connection.
Figure 2: AERO.10 Rear Panel
15