4.3.3. Downloading NfRemote
To download NfRemote from the AERO.10, simply click on the hyperlink which lists
the IP address of the unit followed by "/NfRemote.exe", as shown below:
Then save to your local machine. After saving NfRemote to your computer, install it
as described in section 4.2.1.
4.3.4. Loudness Measurement Logs
The AERO.10 is capable of logging loudness measurements at each of the 3 program
outputs.
Loudness logs are available individually for:
• Currently running log
• Past 24 hours
• Past 48 hours
• Past 7 days
• Past 70 minutes – high resolution
Loudness measurement data is recorded and entered into the log file once per
second, with the exception of the High Resolution log file which records data every
400 ms.
Note!
Loudness regulations and tools such as loudness control, loudness
measurement, and loudness logs are intended to match the
average loudness level across an entire piece of content (program,
advertisement, etc.)
It is perfectly acceptable to have loudness levels vary over the
course of a program, maintaining intended "creative" dynamics
that the producer included into the audio mix. In fact, the
Figure 35: Link to Download NfRemote
49