Clock Reference - Linear Acoustic AERO.10 User Manual

2.2.6. Clock Reference
It is important to properly set the reference clock for the AERO.10 and your system.
To select the proper clock reference, navigate to: "System" > "I/O Setup" > "HW
I/O"
The clock reference options are:
• Internal 48 KHz
• AES Reference Input
• AES Input 1
• SDI input
Note!
When SDI Embedding is enabled in the AERO.10, the Clock
Reference will be forced to SDI input. Audio Sample Rate
Converters are included on the AES inputs in order to provide
glitch-free operation with this setting.
When the reference is locked and valid, the Linear Acoustic logo in the upper left
corner will be lit gray. When no valid reference is found, the Linear Acoustic logo in
the upper left corner will be blinking red:
Figure 10: NfRemote Hardware I/O Setup
Valid Reference Invalid Reference
25