Time Zone; Time; Network Time Protocol (Ntp) Reference; Clock Reference - Linear Acoustic AERO.10 User Manual

5.2.2. Time Zone
Set the Time zone properly. Changing this setting requires a reboot to the AERO.10,
so it is recommended to set this early during the configuration process.
System > Time > Time Zone
Set Time Zone and select Yes (in pop-up) to reboot.

5.2.3. Time

To adjust the System Time manually
System > Time > Set Clock Manually
Adjust the time and date sliders, the press Apply Time and Apply Date to apply the
changes.
5.2.4. Network Time Protocol (NTP) Reference
If NTP reference is desired to be used, navigate to:
System > Time > NTP
• Ensure that NTP Synchronization is disabled (the indicator will be black).
• Click on NTP Synchronization if necessary to disable it.
• Enter NTP server addres(es).
• Enable NTP Synchronization.
5.2.5. Clock Reference
The AERO.10 can be referenced to:
• Internal 48 kHz
• SDI
• AES In 1
• AES DARS (or any AES signal applied to the Ref In connector)
Note!
54