Figure 21: Nfremote Connection Screen - Linear Acoustic AERO.10 User Manual

Note!
The AERO.10 requires a password in order to allow NfRemote to
connect to it and unlock the controls. The factory default
password is "1234".
Some notes about the NfRemote "Start" screen:
• Click once on any entry that has been added to the NfRemote list to load the
entry into the Name/IP/Password windows.
• Edit the name, IP address, or password and then press Update to save the change
in the stored entry.
• You can also click any entry once and hit the Delete key to delete the entry from
the list.
• Double clicking an entry will open an NfRemote connection.
• You can also choose to optimize NfRemote for mouse or touch control. Click on
the drop down below the Add/Update/Delete buttons.
•
Click Connect and the connection screen will be displayed and NfRemote will open.
Figure 21: NfRemote Connection Screen
36