Table of Contents
Advertisement
Although up to eight meters can be shown on the NfRemote screen at once, each
additional meter takes away screen space from the others. Depending on your
monitor size you may find it practical to limit the number of meters on any one
screen. Display presets can be used to quickly switch between different meter
selections. Display presets can also be used to create full screen meter displays.
More meters can be used for full screen view than are practical when the menus are
visible.
You can click on a meter to go directly to the display setup page and specific settings
for that meter at any time.
To setup Meter Display preset 1 start by clicking display preset 1 (next to Menu
button) then click on:
1. Instance 1 > Input > Display Settings
2. Display 1 > Common > Hardware I/O
3. Display 2 > Program 1 > DRC-Program 1
4. Display 3 > Program 1 > Loudness Program 1
Click display preset 2 and then click:
1. Display 1 > Program 2 > DRC-Program 2
Figure 28: Meter Display Preset 1 Configuration Example
42
Advertisement
Table of Contents
