Network Configuration - Linear Acoustic AERO.10 User Manual

The front panel will now be unlocked and settings may be changed.
Please remember to lock the front panel once you are through making adjustments.
It will not lock itself unless it is rebooted.
2.2.5. Network Configuration
The AERO.10 supports both static IP configuration as well as DHCP. DHCP is the
default network setting. It is recommended to assign a static IP address to the
AERO.10, especially in larger systems.
The IP address of the unit may be viewed from the front panel of the AERO.10 even
without unlocking it. Simply press the encoder down until the IP address is
displayed.
To change the IP configuration from DHCP to a static IP address:
2.2.5.1.
• Unlock the front panel
• Press the encoder up and select the "System" field, then press it to the right
to enter the System menu.
• Press the encoder down to select "Network", and the press it to the right to
enter the Network menu.
• Press the encoder down to select "IP Config", then press it right to enter the
IP Configuration menu.
• Select the "Use DHCP" field, and press the encoder to the right to unselect the
DHCP option
• A warning screen will appear. Read the warning.
• Scroll down to "Are you sure?"
• Scroll down to either "No" or "Yes" and press the encoder to the right to
accept the one you choose
• Scroll down past the "Apply" field in order to get to the "IP", "Mask",
"Gateway", and DNS fields and set those to the desired values
• Press the encoder repeatedly to the left to get back to the "System" display
2.2.5.2.
• Launch NfRemote and log in to the AERO.10
From the front panel:
Via NfRemote:
23