Table of Contents
Advertisement
All of the AERO.10 front panel parameter adjustments can also be made via the
NfRemote client. The remote provides additional capabilities:
• Streaming audio back over the local network to the host computer. Audio can be
monitored pre and post processing and at several points internal to the loudness
controller.
• Presets (System I/O setup, main upmix, local upmix, loudness control, etc.) can
each be saved to the host PC and restored from the host PC.
• The entire AERO.10 configuration can be saved to and restored from the host PC.
• Presets and configurations can be shared between AERO.10 units.
• Six meter configurations, each unique to a given PC, can be saved to the local PC
and recalled at the push of a button.
• Multiple NfRemote sessions can be run on a single PC for metering and control of
multiple AERO.10 units.
• Multiple PCs can connect to an AERO.10 simultaneously.
Multiple remote sessions on multiple PCs can run simultaneously. This allows
monitoring of loudness levels for all program outputs to be displayed in a Master
control area and at an engineer's desk at the same time. Configuration and
adjustments can be carried out at another PC simultaneously. Multiple units can
also be viewed on a single screen.
4.2.1. Installation
There are two ways to get NfRemote. The first one is to load it from the USB flash
drive that came with your AERO.10.
The second way is to download it from the AERO.10. If a new version of NfRemote is
required after a software update, it will always be available from the AERO.10 itself.
Section 4.3.3 describes how to download it from the AERO.10.
Note!
The current version of NfRemote is always available directly from
the AERO.10. If a new version of NfRemote is required after a
software update, you can download it directly from the AERO.10
using a web browser.
This section will explain how to install NfRemote using the included USB flash drive.
Find the NfRemote.exe on the USB flash drive and drag it to either the desktop or a
folder of your choosing on your computer. Launch the installer and select Install
from the menu.
34
Advertisement
Table of Contents
