Gpi/O; Ac Power Connection; Unused / Reserved Connections - Linear Acoustic AERO.10 User Manual

An AES Reference input is available. A 48 kHz DARS (Digital Audio Ref Signal), or
any AES signal, but not video is accepted as an input signal. Use only if SDI
embedding is disabled.
Note!
All BNC inputs are 75-Ω internally terminated. This is true
whether they are SDI or AES inputs.

1.5.8. GPI/O

GPI functionality is provided via a DB25 connector. Eight parallel inputs, 5-V TTL
levels, active low are supported.
GPO functions are not currently supported.
Pinout information for wiring harnesses is listed is listed in Appendix B.
1.5.9. AC Power Connection
Two IEC universal power inlets are provided. These accepts AC input from 95v up
through 240v, at either 50 or 60 Hz.
1.5.10.
The following connections on the AERO.10 are currently unused.
• Metadata (DB9 connector)
• Reserved Ethernet (RJ45 connector)
• ENC Out (BNC connector)
• Vref In (BNC connector)
• LTC In (BNC connector)
Unused / Reserved Connections
17