Unpacking And Inspection; Unit Overview; Front Panel - Linear Acoustic AERO.10 User Manual

• ITU-R BS.1770-3 loudness measurement for each output program allows
loudness target calibration and loudness monitoring.
• Dual, selectable upmixers for main and local sources utilizing industry-
standard UPMAX
• Full-time Lt/Rt or Lo/Ro downmix of the main 5.1-channel program
• HD/SD-SDI I/O for embedded audio
• 8-channels of AES-3 I/O
• 2-channel analog audio I/O
• Video compensating delay
• Dual, redundant, auto-ranging power supplies
• GPI and Ethernet control
• NfRemote IP based full function remote control for configuration and
monitoring
1.3. Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the
carton shows damage, inspect the unit in those areas. Please save the carefully
designed shipping carton and packing materials. In the unlikely event that the unit
needs to be returned to the factory, alternate cartons or packing materials may not
be adequate and can cause damage not covered by warranty.
The following essential items are provided with the unit:
• IEC power cord (style matches country of order)
• Quick-start sheet to get you up and running
• USB memory stick containing documentation and NfRemote control software
• A handy black pen
1.4. Unit Overview
This section introduces you to the AERO.10 and its views:
1.4.1. Front panel
II algorithm
®
Figure 1: AERO.10 Front Panel
14