Linear Acoustic AERO.10 User Manual page 43

2. Display 2 > Program 2 > Loudness Program 2
3. Display 3 > Program 3 > DRC- Local
4. Display 4 > Program 3 > Loudness 3
Click display preset 3 and then click:
1. Display 1 > Program 1 > Loudness Program 1
2. Display 2 > Program 1 > Graph Program 1
3. Display 3 > Program 2 > Loudness Program 2
4. Display 4 > Program 2 > Graph Program 2
5. Display 5 > Program Local > Loudness Local
6. Display 6 > Program Local > Graph Local
To turn a display on off click on Display Settings, select any display and select Off
from the menu.
To aid in setting up the DRCs (loudness controllers) and also to evaluate content pre
and post processing there are several audio analyzers available in the Display
settings menus:
For each Pgm there are meters for:
• DRC activity
• Loudness Meter *
• Loudness Graph
• EBU Loudness Range.
* ITU Loudness Meter is used unless the EBU R128 meter option is installed.
True Peak readings are shown on each Loudness meter.
Common meters include:
• Instance I/O
• Hardware I/O
• Oscilloscope
• RTA
• FFT
• Client Audio Meters
The Oscilloscope, RTA, and FFT are valuable monitoring and diagnostic tools that
can measure and display signals from myriad patch points within AERO.10.
Extensive setup controls are provided for these meter types.
43