• Click down to access the IP address slot desired.
• Click right to access the keyboard window
• Enter the desired IP address (clicking right at each digit and period to "take"
the change)
• Scroll over to "Ok" when finished
• Click right to enter the IP address.
4.3.1.2.
To configure the Whitelist using NfRemote, navigate to:
System > Network Access > HTTP Access
Since wildcard characters are supported, in the example above, all computers with
an IP address of 10.0.0.xxx are able to access the AERO.10's HTTP server.
4.3.2. Accessing the HTTP homepage
The unit's HTTP server uses port 7380. To gain access to the unit's HTTP server
home page, open up a web browser such as Internet Explorer, Apple Safari, Google
Chrome, etc., and navigate to the unit's IP address adding ":7380" at the end to
specify the port.
NfRemote
Figure 32: NfRemote Whitelist Configuration Panel
47